Instructions on the new batch of X1 to replace the display screen

thank your friends who have always supported and liked X1!

I'm sorry to tell you that due to supply reasons, the original X1 display screen could not be purchased normally. After many twists and turns, our existing suppliers found the display screen with the same resolution and color among the resources that can be supplied, and began to customize polarizer, FPC cable, backlight, etc, after many debugging, the brightness, color and resolution are equivalent to the original display screen.

1. The new display machine has exactly the same function as the original display machine!

2. Due to the replacement of different data IO ports on the new display screen, the machine using the new display screen will not be compatible with the old version of software (* cannot be reduced to FW1.2 or below firmware version). If it is reduced to FW1.2 or below, it will prompt "Version too old", and then it will automatically start up. The firmware of X1 itself will not be damaged, which will not affect the normal use of customers and subsequent.

3. The machine with the original display screen can normally lift the firmware.

4. The factory built-in firmware version is FW1.3 and later firmware uses a new display screen. (System Settings-Native and Stored Information)