Dual magnetic circuit dynamic driver in a dual-layer housing Magnetic conductivity enhancer | Semi-crystalline PU polymer diaphragm | Frequency response tuned towards Harman curve 316L stainless steel construction | HS18 ear tips included L-shaped MMCX connectors | HB1 storage case included

*Pictures are for reference only. The actual product may vary

Providing you value, all-new ultra-thin HS18 ear tips included

Included with the JD7 are three pairs* of FiiO’s brand-new ultra-thin HS18 ear tips. With a thickness of only 0.4mm, the HS18 ear tips are light and comfortable to wear. The HS18 ear tips also feature a large opening the same size as the JD7 sound tubes to minimize sound barriers between the earphone and the eardrum, to fully let you hear the JD7’s sound as intended.

 

*S/M/L sizes (M size is pre-installed)

Fatigue-free long listening, Semi-open design

The semi-open design of the JD7 has sonic benefits by allowing for a softer yet more natural sound in a wider soundstage. On top of that, the semi-open design balances air pressure in the JD7’s housing which eliminates pressure on the eardrum and ultimately protects your ears, for long fatigue-free listening.

 

TThe JD7 comes with the HB1 storage case that not only allows you to conveniently organize and carry your earphones with you on your travels, but also securely protects them too. 

Take on life’s challenges, HB1 storage case included

Note: The product layout is for reference only. All products shall prevail.

With the JD7, you can get great sound almost out of any source. Its magnetic conductivity enhancer increases the magnetic flux generated by the drivers to over 1 Tesla, resulting is a sensitivity of 108dB – meaning even you phone can easily drive the JD7.

 

More push for better sound, magnetic conductivity enhancer

Dual magnetic circuit dynamic driver in a dual-layer housing, Internal and external magnetic circuits

The JD7 features a 10mm dynamic driver with an internal and external magnetic circuits setup that greatly improves the magnetic flux density so that the driver can push more air for a more effortless sound. The JD7’s driver is put into a dual-layer housing where each layer features a damping system to better control unwanted vibration and resonances resulting in lower distortion – ultimately resulting in a quicker-sounding driver with deeper bass.

 

Good sound from good materials, semi-crystalline PU polymer diaphragm

The JD7 features a polymer diaphragm with a PU gasket, specifically chosen for its unique and favorable characteristics. The PU gives vocals a unique, lush sound. The polymer diaphragm is stiff enough so that there is minimal unwanted vibration and movement during large driver movements, yet is still responsive enough to quickly move according to analog signals as they come. All of this results in a fast, clean sound  – especially in the bass. 

The JD7 features a frequency response very close to the Harman curve (In ear 2019) that will please a wide variety of people

*The Harman curve is a theoretical target sound signature developed by scientist and audio engineer Sean Olive and his team

*The Harman curve is a theoretical target sound signature developed by scientist and audio engineer Sean Olive and his team

Tuned with an ear towards enjoyment, frequency response tuned towards Harman curve

White balanced silicone ear tips  S/M/L sizes 3 pairs FiiO HS18 ear tips S/M/L sizes 3 pairs (M size pre-installed) Black memory foam ear tips M size 1 pair Transparent storage case HB1 1x,  MMCX quick release 1x Headphone cable 1x,  Instruction manual 1x

Accessory list

Superior materials, 316L stainless steel construction

The JD7 ear units are made of 316L stainless steel. The shells are made of metal powder that goes through injection molding and is sintered at 1000 degrees in a process called metal injection molding. This results in the JD7 not only being comfortable to wear, but also being highly durable and resistant to wear and tear.