6. How to Use the Optical and Coaxial Decoding Functions of the WARMER R2R

Optical Decoding Setup:

1.After turning on the device, rotate the front panel knob to the OPT position.

2.Connect an optical cable to the OPTICAL IN port on the rear panel, with the other end connected to an optical output device.

3.Use RCA (dual phono) cables or XLR cables to connect the WARMER R2R to your downstream amplifier. Setup is now complete.

Play a song on your source device. The audio will be decoded by the WARMER R2R and output via line-out to your amplifier.

Coaxial Decoding Setup:

1.After turning on the device, rotate the front panel knob to the COAX position.

2.Connect a coaxial cable to the COAXIAL IN port on the rear panel, with the other end connected to a coaxial output device.

3.Use RCA (dual phono) cables or XLR cables to connect the WARMER R2R to your downstream amplifier. Setup is now complete.

4.Play a song on your source device. The audio will be decoded by the WARMER R2R and output via line-out to your amplifier.

Note: In optical, coaxial, and USB decoding modes, both the XLR and RCA interfaces output signals simultaneously.