6. How to update the M25/M25 R2R firmware?

For a local update, make sure that you download the firmware package intended for the correct M25 or M25 R2R version.

The M25/M25 R2R supports both online and local firmware updates.

  1. Online Update

Connect to Wi-Fi. If a new firmware version is detected, an update notification will appear in the notification panel. Tap it to open the update page.

You can also go to Technical Support > Firmware Update > Online Update and manually tap Check for updates.

  1. Local Update

Download the firmware package from the official website and copy it to the internal storage or a microSD card. Go to Technical Support > Firmware Update > Local Update, locate the downloaded firmware package, and tap it to begin the update.

Important:

  1. Do not extract the firmware package.

  2. Make sure the battery level is above 30% before updating.

  3. If the player enters Recovery mode during the update and cannot detect the firmware, the package may be damaged. Press the Power button to confirm, select Reboot, download the firmware again, copy it back to the player, and retry the update.

Possible update problems and solutions

The update normally takes approximately 5–20 minutes. Afterward, the system restarts automatically, which may take approximately two minutes. Please wait patiently.

  1. If the system freezes after the update and cannot start normally, press and hold the Power button for approximately 10 seconds until the “FiiO” logo appears.

  2. If an online update reports an invalid image, go to Internal storage/Android/data/com.android.fiioupdate/files, delete the folder, and retry the online update.

  3. If the online update fails, try a local update. If the local update fails, the installation package may have been damaged during downloading or copying. Download it again and retry.

  4. If the player enters Recovery mode and cannot detect the firmware, press the Power button to confirm, select Reboot, download the firmware again, copy it to the player, and retry.

  5. If a system error occurs, enter Recovery mode and restart the device. With the player powered off, press and hold Volume Down, then connect a USB cable for power or press the Power button. Release the button after Fastboot mode appears. Use Volume Up/Down to select Recovery mode and press the Power button to confirm. Select Wipe data/factory reset to restore factory settings, or Reboot system now to restart the player.

ꄘViews:0
ꄀCollection