17. M25 Settings—Audio

  1. Select 3.5mm output mode

PO (headphone output): Generally used with headphones or powered speakers.

LO (line output): Generally used with an amplifier.

Warning: Line output is normally not affected by the volume control. Switching to LO sets the output to its maximum level, which may damage headphones or hearing. Disconnect headphones and connect a suitable device correctly before switching to LO.

SPDIF (coaxial output): Generally used with an external DAC.

  1. Select 4.4mm output mode

The 4.4mm output supports both LO and PO modes.

PO: Generally used with headphones or speakers equipped with a balanced input.

LO: Generally used with an amplifier equipped with a balanced input.

The 3.5mm and 4.4mm outputs use first-connected priority.

  1. SPDIF OUT

This setting controls the coaxial output signal and is relevant only when coaxial output is used.

In D2P mode, PCM is output as native PCM, while DSD is converted to PCM before output.

In DoP mode, PCM and DSD are both output without conversion; DSD is carried using DoP.

Note: DoP is recommended first. Select D2P if the downstream device does not support DoP.

  1. Gain

Four levels are available: Low, Medium, High, and Super High Gain mode. Each corresponds to a different output voltage. Select the appropriate level for the connected headphones.

Note: Super High Gain mode is hidden by default and becomes available only when a fast charger is connected.

  1. Personalized sound

Four profiles are available: Prism Horizon, Azure Atmos, Scarlet Gravity, and Wild Groove. Prism Horizon is selected by default.

Prism Horizon is recommended with the Slow Roll-Off filter. Azure Atmos, Scarlet Gravity and Wild Froove are recommended with the Super Slow Roll-Off filter.

  1. Lowpass filter mode

The M25 provides six lowpass filter modes. Select one according to your listening preference.

These filters are supplied by the DAC manufacturer and make relatively subtle adjustments to the sound.

  1. DRE

DRE automatically adjusts gain according to the input signal level to prevent overload distortion while preserving detail at low volume.

  1. Warmth Control

While preserving audio detail, moderate harmonic compensation gives the sound a warmer, fuller, and more enveloping character. Four settings are available: OFF, Level 1, Level 2, and Level 3. The default is OFF.

  1. All to DSD

When All to DSD is enabled, system-wide PCM audio is converted to DSD for output.

Principle: All to DSD converts PCM digital signals into DSD so that D/A conversion can be performed through the DSD signal path, producing a different sound character that may be perceived as clearer and more natural. Because even the lowest DSD format, DSD64, carries approximately four times the data of 44.1kHz/16-bit PCM, All to DSD also functions as a form of upsampling for formats such as 44.1kHz/16-bit. Third-party apps also support the system-wide All to DSD effect.

Note: All to DSD increases CPU power consumption, which shortens battery life and causes more noticeable chassis heating.

If battery life is significantly shorter than the reference figure on the official website, check whether All to DSD is enabled. Disable it and test again under the reference test conditions provided by FiiO.

  1. Equalizer

The system-wide PEQ can be combined with the FiiO Music EQ and effects from third-party apps. When system PEQ is enabled, processing follows these rules:

  1. Tracks with sample rates above 192kHz are output after SRC processing.

  2. Processing priority: All to DSD > PEQ > MQA.

  3. PEQ applies only to local analog output. It is effective in Android mode, Pure Music mode, and AirPlay mode, but not in Bluetooth Receiving or UAC mode.

  1. Balance

Channel balance independently adjusts the output level of the left or right channel to accommodate a user's hearing needs. Users with equal hearing in both ears normally do not need this function because the two channels are balanced by default.

The default value is 0. Each channel offers 20 adjustment steps, with a difference of approximately 0.5dB per step.

  1. Bluetooth Audio Encoder

During Bluetooth transmission, the player connects using the highest mutually supported codec by default. This option allows you to restrict the highest codec used.

The M25/M25 R2R supports LDAC, LHDC, aptX HD, aptX, and SBC. Select a codec under Settings > Audio > Wireless playback quality. Disconnect and reconnect Bluetooth after changing the codec.

  1. Bluetooth Audio LDAC Encoder—Playback Quality

Four options are available: prioritize audio quality (990/909kbps), balance audio and connection quality (660/606kbps), prioritize connection quality (330/303kbps), or best possible sound quality (adaptive bit rate). This setting applies only to Bluetooth transmission.

  1. Bluetooth Audio LHDC Encoder—Playback Quality

Five options are available: prioritize audio quality (900kbps), balance audio and connection quality (500/560kbps), prioritize connection quality (400kbps), prioritize low latency (256kbps), or best possible sound quality (adaptive bit rate). This setting applies only to Bluetooth transmission.

  1. Bluetooth Volume Adjustment Mode

This setting applies only to Bluetooth transmission and offers Sync Bluetooth volume and Indep

Bluetooth volume.

Bluetooth volume synchronization also requires support from the receiving device; otherwise, synchronized adjustment will not work.

With independent Bluetooth volume, the receiver and transmitter volumes are controlled separately and do not affect each other.

If the volume is low with AirPods, a Bluetooth speaker, or Bluetooth headphones, select Bluetooth volume synchronization, then disconnect and reconnect Bluetooth.

  1. Adjustable volume at LO

When Adjustable line output volume is enabled, LO volume can be adjusted. When disabled, LO is fixed at its maximum output level.

  1. System USB output volume adjustable

When enabled, non-exclusive USB Audio output defaults to volume 45, and the USB Audio output volume can be adjusted on the player. When disabled, USB Audio is forced to maximum volume and cannot be adjusted.

  1. System SPDIF output volume adjustable

When enabled, coaxial output volume can be adjusted on the M25.

  1. Auto pause without headphones

When enabled in Android mode or Pure Music mode, if music is playing without headphones connected, the system automatically pauses playback after two minutes.

ꄘViews:0
ꄀCollection