23. How to use FiiO Cast function?

  1. Download and install the FiiO Control app on the phone from an app store.

  2. Connect the phone and M25/M25 R2R to the same local network.

  3. Open the Remote Control app on the M25/M25 R2R and tap Start. Tap More connection methods to view the IP address and QR code.

  4. Open FiiO Control on the phone, tap Add new device, select Player, and connect to the IP address discovered for the M25/M25 R2R. You can also scan the QR code shown in Step 3.

If Remote Control worked previously but cannot reconnect later, try the following:

  1. Check whether the network connection of the phone or M25/M25 R2R has changed.

  2. Confirm that the Remote Control background service has not been terminated.

  3. Confirm whether the Remote Control IP address has changed.

  4. If the background service is running and the IP address has not changed, delete the previously added device from the phone. Turn the Remote Control service off and back on on the M25/M25 R2R, then add the device again in FiiO Control.

  5. If the problem persists after all the steps above, contact Customer Service.

ꄘViews:0
ꄀCollection