| General Specifications |
| Name/Model |
MAGE |
Hardware solution |
SoC: SPV6040D |
| Color |
Trans Black, Trans Green, Gray |
Weight |
About 15g |
| Dimensions |
About 55×30×13mm |
Volume control |
Button control |
| Recommended headphone impedance |
8~100Ω |
|
|
| Buttons and Ports |
| Buttons |
Volume up*1 + Volume down*1 + Previous track*1 + Next track*1 + Mode switch and Play/Pause button*1 + Microphone on/off button*1 |
USB |
Type-C USB2.0*1 (power supply/data transfer) +Type-C POWER IN*1 (power supply) |
| Headphone out with mic |
Standard 3.5mm port + Supports CTIA-standard inline mic |
Headphone out |
Standard 3.5mm port |
| Independent MIC port |
Standard 3.5mm port |
|
|
| Special Functions |
| Game mode |
Built-in 4 game sound effects: FPS/ACT/MOBA/MUG; supports custom sound effects |
Music mode |
7 built-in music sound effects; supports custom sound effects |
| 7.1 channel sound effects |
Supports 3D gain and reverb intensity adjustment, with adjustable channel phase |
PEQ |
Supports 10-band PEQ + AUTO EQ |
| Microphone volume control |
Supported |
AI mic noise reduction |
Supports AI noise reduction in non-7.1 channel mode |
| Indicator light |
Supports sampling rate indicator, 7.1 channel status indicator, and microphone status indicator |
Indicator light switch |
Supported |
| FIIO Control Web |
Supported. You can set sound effects, PEQ, microphone volume, indicator light switch, and more. |
Driver-free mode (switch mode) |
Supported |
| Sampling rate support |
384kHz/32bit; DSD256 (Native) |
Firmware upgrade |
Supports USB-OTA updates |
| Power Supply Parameters |
| Power supply |
DC 5V ≥ 1A |
Reverse charging |
Supports reverse charging up to PD 60W (actual fast-charging power may vary depending on phone compatibility) |
| Buttons and Ports |
| Performance and parameters of headphone output (3.5mm, USB DAC) |
| Output power |
L+R≥35mW+35mW (16Ω, THD+N＜1%, 0.7Vrms) |
Output impedance |
＜5.5Ω |
| L+R≥27mW+27mW (32Ω, THD+N＜1%, 0.9Vrms) |
Crosstalk |
≥76dB |
| L+R≥4mW+4mW (300Ω, THD+N＜1%, 1.1Vrms) |
THD+N |
＜0.004% (1kHz/-12dB@32Ω) |
| Noise floor |
＜5.7uV (A-weighted) |
SNR |
≥105dB (A-weighted) |
| Frequency response |
20Hz~40kHz: attenuation＜1.3dB |
Dynamic range |
≥105dB (A-weighted) |
| 20Hz~20KHz: attenuation＜0.3dB |
Peak output voltage |
3Vp-p |
